Tecfluid FLOMAT Series Manual de usuario descargar pdf (Pagina 6)

3.6 Vibrations

Vibrations of the pipes should be avoided by anchoring the pipe before and after the

sensor.

The vibration level should be less than 2.2 G in the range of 20 -150 Hz according to IEC

068-2-34.

3.7 Magnetic fields

Strong magnetic fields close to the sensor should be avoided.

3.8 Temperature

In open air installations it is recommended to install a protection to avoid direct sun light on

the flowmeter.

With thermally insulated pipes DO NOT insulate the sensor. High temperatures can

damage it.

1 2 3 4 5 6 7 8 9 10 11 12

Sin comentarios

Tecfluid FLOMAT Series Manual de usuario Pagina 6