Tecfluid TM Series Manual de usuario descargar pdf (Pagina 11)

TECHNICAL DATA

Accuracy

± 0.5% measured value

Repeatability

± 0.1% measured value

Temperature

Process temperature:

-50 ºC … +170 ºC

Ambient temperature:

-20 ºC ... +60 ºC

Connections

EN 1092-1 flanges. Other flange standards.

BSP or NPT threaded connections

Sanitary couplings according to ISO 2852, SMS 1145, DIN 11851, TRI-CLAMP®

Materials

Body: EN 1.4404 (AISI 316L)

Propeller: EN 1.4016 (AISI 430)

Working pressure

DN15 ... DN50: PN40

DN65 ... DN150: PN16

Others on request

Electrical connection

By means of IP65 connector.

Signal amplitude

> 15 mV, proportional to flow rate

Recommended cable

Shielded bifilar up to 30 m length.

NOTE: For distances up to 100 m the APTM44 amplifier shall be used.

Conforms with the Pressure Equipment Directive 97/23/EC.

This equipment is considered as being a pressure accessory and NOT a safety accessory

as defined in the 97/23/CE directive, Article 1, paragraph 2.1.3.

Associated electronics

CIP / CIP II: Battery powered volumetric counter.

CP ... CH420: 2-wire analog transmitter with flow rate and volume indication.

HART protocol optional.

MC01: Flow rate and volume indicator with relay output for batching.

MT02: Volume counter with relay output for batching.

DFD2: Frequency divider.

CI420: Analog transmitter.

APTM44: Pulse converter for the pickup signal.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 19 20

Sin comentarios

Tecfluid TM Series Manual de usuario Pagina 11